SIC
close

Case Studies Using Ina128ua/2k5

The INA128UA/2K5 is a precision, low power instrumentation amplifier designed for a wide range of applications requiring accurate signal amplification. Its low noise and high common-mode rejection ratio make it the ideal choice for precision measurements in areas such as medical instrumentation, industrial control systems, and test and measurement equipment. With a wide input voltage range and high gain accuracy, the INA128UA/2K5 excels at amplifying small signals while maintaining high precision.

This instrumentation amplifier also features low power consumption, making it suitable for portable and battery-powered applications. Additionally, its versatile design and flexible power supply range make it easy to integrate into a variety of systems.

With its superior performance and versatility, the INA128UA/2K5 is an essential component for engineers and designers looking to achieve high-precision signal amplification in their applications.

banner

Hot Products

View More
  • 1009310060 M+A Matting

    1009310060 M+A Matting

  • 20056316170 M+A Matting

    20056316170 M+A Matting

  • 1857046090 M+A Matting

    1857046090 M+A Matting

  • 100136060 M+A Matting

    100136060 M+A Matting

  • 1001348040 M+A Matting

    1001348040 M+A Matting

  • 10011612160 M+A Matting

    10011612160 M+A Matting

  • 1001468160 M+A Matting

    1001468160 M+A Matting

  • 1004610160 M+A Matting

    1004610160 M+A Matting

  • 1004310050 M+A Matting

    1004310050 M+A Matting

  • 1003512050 M+A Matting

    1003512050 M+A Matting

  • 1002158150 M+A Matting

    1002158150 M+A Matting

  • 1004410150 M+A Matting

    1004410150 M+A Matting

Related Blogs

  • 2025 / 06 / 30

    Multivariate Application Analysis of Power Amplifiers in Sensor Testing

    In the field of modern sensor testing, power amplifiers (PAs) serve as core components and play an indispensable role. From amplifying weak signals to simulating complex physical environments, power amplifiers provide solid guarantees for the precise testing of sensor performance through their uniqu...

    Multivariate Application Analysis of Power Amplifiers in Sensor Testing
  • 2025 / 06 / 28

    ESP32 vs STM32: Which Microcontroller Suits You Better?

    In the field of embedded development, both ESP32 and STM32 are highly favored microcontrollers, each with unique features and advantages. When facing project development, how do you choose between them? This requires comprehensive consideration of multiple factors. The following detailed comparison ...

    ESP32 vs STM32: Which Microcontroller Suits You Better?
  • 2025 / 06 / 26

    Key Strategies to Enhance Buck Power Supply Efficiency

    Improving the efficiency of Buck (step-down) switching power supplies requires a multi-dimensional approach targeting energy loss sources, including component selection, topology optimization, control strategies, and thermal management. Below are core strategies and engineering practices:...

    Key Strategies to Enhance Buck Power Supply Efficiency
  • 2025 / 06 / 26

    P-Channel MOSFET Turn-On Conditions

    The turn-on conditions for a P-channel MOSFET (PMOS) are inverse to those of an N-channel MOSFET (NMOS), primarily governed by the relationship between the gate-source voltage (VGS) and the threshold voltage (Vth), along with voltage polarity. Here are the key points:A PMOS turns on when its gate vo...

    P-Channel MOSFET Turn-On Conditions
  • 2025 / 06 / 24

    A8304SESTR-T Allegro MicroSystems-Single LNB Supply and Control Voltage Regulator

    The Allegro MicroSystems A8304SESTR-T is a single-channel Low Noise Block Regulator (LNBR). It integrates a monolithic boost converter with MOSFET, current sensing, and compensation. Featuring a 704 kHz switching frequency, it uses few external components. With an I²C-compatible interface, it offers...

    A8304SESTR-T Allegro MicroSystems-Single LNB Supply and Control Voltage Regulator
  • 2025 / 06 / 20

    EG25GGC-128-SGNS by Quectel Wireless Solutions Co., Ltd: Features,Symbol,Footprint and Datasheet

    The Quectel EG25GGC - 128 - SGNS is an LTE Cat 4 module optimized for M2M and IoT. Supporting 3GPP Rel. 11, it offers up to 150Mbps downlink and 50Mbps uplink. With global LTE/UMTS/GSM coverage, it's backward - compatible with EDGE/GPRS. Featuring multi - constellation GNSS (GPS, GLONASS, BeiDou, et...

    EG25GGC-128-SGNS by Quectel Wireless Solutions Co., Ltd: Features,Symbol,Footprint and Datasheet
  • 2025 / 06 / 17

    STMicroelectronics STM32F413CGU6 Microcontroller: Datasheet, Performance, Features

    The STMicroelectronics STM32F413CGU6 is an Arm® Cortex®-M4 based MCU with FPU, operating at up to 100 MHz for 125 DMIPS performance. It features 1MB Flash, 320KB SRAM, and interfaces like USB OTG FS, 3 CAN, ADC, 2 DAC, and multiple serial ports. With low-power modes (Sleep, Stop, Standby), it suits ...

    STMicroelectronics  STM32F413CGU6 Microcontroller: Datasheet, Performance, Features
  • 2025 / 06 / 13

    STMicroelectronics STM32F446ZCT6 -Microcontrollers: A Comprehensive Guide

    The STMicroelectronics STM32F446ZCT6 is an ARM Cortex-M4-based MCU with FPU, running at up to 180 MHz. It features 256 KB Flash, 128 KB SRAM + 4 KB backup SRAM, and offers rich peripherals: USB OTG HS/FS, 2 CAN, 3 ADCs, 17 timers, and 20 communication interfaces. In LQFP144 package, industrial temp ...

    STMicroelectronics STM32F446ZCT6 -Microcontrollers: A Comprehensive Guide
  • 2025 / 06 / 09

    MC33887PNB NXP Semiconductors-Motor Drivers:A Comprehensive Guide

    The NXP Semiconductors MC33887PNB is a 5.0 A H - bridge power IC with integrated load current feedback. It operates across a 5.0 V - 28 V voltage range, features low RDS(on) (120 mΩ typical), and supports up to 10 kHz PWM. With functions like active current limiting and fault reporting, it ensures r...

    MC33887PNB NXP Semiconductors-Motor Drivers:A Comprehensive Guide
  • 2025 / 06 / 07

    A 16-bit Bus Transceiver: Why Choose the Texas Instruments SN74ACT16245QDLREP?

    The Texas Instruments SN74ACT16245QDLREP is a high-performance 16-bit bus transceiver. Designed for harsh industrial and automotive environments, it operates reliably from -40°C to +125°C. With its dual 8-bit non-inverting 3-state architecture, it enables efficient bidirectional data transfer. It of...

    A 16-bit Bus Transceiver: Why Choose the Texas Instruments SN74ACT16245QDLREP?
  • Daily average RFQ Volume

    2000+

    Daily average RFQ Volume

  • Standard Product Unit

    30,000,000

    Standard Product Unit

  • Worldwide Manufacturers

    2800+

    Worldwide Manufacturers

  • In-stock Warehouse

    15,000 m2

    In-stock Warehouse